How much does a cubic foot of soil weight?
To first determine how much a cubic foot weighs, you start with how much a cubic yard weighs, which is 2,000lbs (or 1 ton). Next, you need to do a little bit of math. There are 27 cubic feet in a cubic yard, so if you divide 2000 by 27, that comes out to 74.07lbs (0.037 tons).
There are 25.71 dry quarts per 1 cubic foot. To convert from cubic feet to cubic yards, you would need to know that there are 3 feet in a yard. Thus, a cubic yard is equal to 27 cubic feet.
1 Cubic Ft. = 62.41 Lbs. 1 Gallon = 8.34 Lbs.
There are between 69 and 100 pounds in a cubic foot of dry soil; 149.83 pounds in a cubic foot of concrete; 490.1 pounds in a cubic foot of steel.
1 Cubic Ft. = 62.41 Lbs. 1 Gallon = 8.34 Lbs.
Consider a ½ cubic foot bag of stone or soil weighs about 50 lbs and will cover 2 square feet at 3" deep.
Consider a ½ cubic foot bag of stone or soil weighs about 50 lbs and will cover 2 square feet at 3" deep. A bag of hardwood or cedar bark contains about 1 cubic foot of material, enough to cover about 4 square feet at 3" deep. If you have large areas you probably need bulk.
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard).
Simply multiply the length by the width by the depth or use our simple volume calculator. Circular areas are also easy to calculate. Simply multiply 3.1415 (π) by the radius, by the radius again, by the depth or use our simple volume calculator.
Moisture and water weight is considered a live load meaning it is not an intrinsic weight of a structure. When the soil is saturated the garden will weigh more. We found that standard wet soil is 100-120 lb/ft³.
How heavy is 1 cubic yard or dirt?
Topsoil is sold by the cubic yard and cubic foot. A dry cubic yard can weigh up to 2,000 pounds. A wet cubic yard can weigh up to 3,000 pounds.
Volumes at Pressure and Temperature
The two common standardized volumes are standard cubic feet (scf) and normal cubic metres (Nm3). A standard cubic foot corresponds to 1 cubic foot of gas at 60 °F (15.6 °C) and 14.73 PSIA, and a normal cubic metre of gas corresponds to 1 cubic metre at 15°C at 101.325 kPaA.
Using the specific gravity of 1.3 above that would occupy 31,397cc. A foot is 30.48cm so there are 28,317cc in a cubic foot. Dividing 31,397 by 28,317 gives a volume of around 1.109 cu ft for your soil.
| Cubic Yards | 1 Cubic Foot Sized Bags | 2 Cubic Foot Sized Bags |
|---|---|---|
| 1 | 27 | 14 |
| 2 | 54 | 27 |
| 3 | 81 | 41 |
| 4 | 108 | 54 |
| Soil Type | g (lb/ft3) | gsub (lb/ft3) |
|---|---|---|
| Sandy or Silty Clay | 100 - 147 | 38 - 85 |
| Silty Clay with Gravel; uniform | 115 - 151 | 53 - 89 |
| Well-graded Gravel, Sand, Silt and Clay | 125 - 156 | 62 - 94 |
| Clay | 94 - 133 | 31 - 71 |
In most instances, the LTL carrier stipulates that if a shipment fills more than 750-cubic feet AND the shipment maintains a density of less than six-pounds per cubic foot; it's not paying a fair share. This is generally referred to as the cubic capacity rule.
HOW LARGE IS 100 CUBIC FEET? To give you a rough idea of how large a 100 cubic foot space will be, measure a square on your floor that is 4 foot x 4 foot. If this space were to be stacked 6 foot high then the stack would equal 100 cubic feet (4 foot x 4 foot x 6 foot).
To calculate the cube you need to have the dimensions of your freight in inches. Multiply the dimensions for each package then divide that amount by 1728 to get the cubic feet. Multiply the cubic feet by 10 to get the cubic weight (lbs).
4' x 4' x 2' = 32 cubic feet
If you have more than one garden that's the same size, you'll just multiply the total cubic feet per bed by the number of beds.
1 yard equals 27 cubic feet. Think about it as a cube that is 3′ X 3′ X 3′.
How much is 40 lbs of soil?
Those 40lb bags of "topsoil", "compost", "manure", etc are generally around . 75 cubic feet when measured by volume.
| Depth | One 2 Cubic Foot Bag Covers |
|---|---|
| .5” | 48 sq feet |
| 1” | 24 sq feet |
| 2” | 12 sq feet |
| 3” | 8 sq feet |
How many feet are in a cubic foot? A cubic foot is made up of three dimensions (length, width, and height) that all equal 1 foot. After multiplying the three dimensions, a cubic foot is equal to 1.
HOW LARGE IS 50 CUBIC FEET? To give you a rough idea of how large a 50 cubic foot space will be, measure a square on your floor that is 4 foot x 4 foot. If this space were to be stacked 3 foot high then the stack would equal 50 cubic feet (4 foot x 4 foot x 3 foot).
Soil is either sold in bags by the cubic foot or by the yard if buying in bulk. You can easily convert your feet to yards by remembering there are 3 feet in a yard. Therefore, 24 cubic ft would be 0.9 cubic yards. Easy!
Consider a ½ cubic foot bag of stone or soil weighs about 50 lbs and will cover 2 square feet at 3" deep. A bag of hardwood or cedar bark contains about 1 cubic foot of material, enough to cover about 4 square feet at 3" deep.
To calculate the total volume of soil, we add the volume of solids plus the volume of water plus the volume of air. The volume of voids is found by adding the volume of water and the volume of air. When a sample of soil is compacted, its volume of voids decreases which decreases the total volume of the soil sample.
Formula for Specific Volume
To calculate specific volume you need to know the volume (V) and the mass (m). Specific volume equals volume divided by mass. Typically, volume is measured in cubic meters (m3), and mass is measured in kilograms. Specific volume is then calculated as volume divided by mass.
Bulk soil is measured in yards. 1 yard equals 27 cubic feet. Think about it as a cube that is 3′ X 3′ X 3′. All machinery that can load bulk soil is, by law, labeled as to the volume of the scoop.
What does 1 cubic foot of topsoil weigh?
One cubic foot of topsoil weighs around 40 pounds. The exact weight will depend on various conditions. Some of the factors that can affect the weight include moisture content and any small debris found in the soil. Topsoil does contain far less sediment than fill dirt, so the weight is more consistent in general.
Bulk soil is measured in yards. 1 yard equals 27 cubic feet. Think about it as a cube that is 3′ X 3′ X 3′.
Calculate the moisture content of the soil by subtracting the weight of the dry soil from the weight of the moist soil, and then dividing by the weight of the dry soil. Although the measurement is simple, it is important to determine soil moisture content in order to better understand soil characteristics.
A dump truck load of fill dirt is typically 15 to 18 tons. This can be 10 to 15 cubic yards of dirt. Remember to consider about 10% more if you are planning on compacting the fill dirt. Also, be sure to use our calculator to find out how much dirt you need.
Depending upon your wheelbarrow size (i.e. 2 or 3 cubic feet per wheelbarrow load), it will take 9 to 14 full loads to equal 1 cubic yard. The chart below shows how many full wheelbarrow loads it takes to equal the specified number of cubic yards. A 2 cubic foot wheelbarrow typically has a shallow basin.
For example, if you dig up a flower bed that is 9 feet long, 3 feet wide and 12 inches deep, you will have one cubic yard of dirt. This is how it breaks down: 3 feet equals 1 yard, so 9 feet equals 3 total yards in length.
How many feet are in a cubic foot? A cubic foot is made up of three dimensions (length, width, and height) that all equal 1 foot. After multiplying the three dimensions, a cubic foot is equal to 1.
A standard cubic foot corresponds to 1 cubic foot of gas at 60 °F (15.6 °C) and 14.73 PSIA, and a normal cubic metre of gas corresponds to 1 cubic metre at 15°C at 101.325 kPaA. It is important to list the temperature and pressure being used as standard, since many standards are used worldwide.
To get a healthy lawn, your soil will ideally be made up of a balance of sand, silt and clay. This is called loam soil. Loam soil holds moisture but also drains well when you water the lawn. It is able to retain nutrients and allow air flow, making it the most ideal soil for plants.
What is the best topsoil for your yard?
Sandy soil is among the best topsoil for lawns. You can use it in your topdressing applications to make your lawn smooth and improve drainage. On the other hand, clay-like soil also has its benefits, since it is firm and holds moisture, making it easier for grass roots to absorb.
Retailers usually sell soil and mulch by the 1 or 2 cubic feet amounts, but even if they don't, you can quickly determine how many bags to buy. Multiply the number of yards of material you need by 27 to find the total cubic feet, then divide by the number of cubic feet in the bag.
If you're planning a 12-inch deep raised bed, you'll need approximately 24 cubic feet of soil to fill a 4x8 bed. A depth of 18 inches will require approximately 36 cubic feet of soil. The type of soil you use will also affect the volume required to fill your raised bed.
One cubic yard of topsoil weighs approximately 1,080 pounds. The estimate is based on the cubic yard calculation. One cubic foot of topsoil weighs around 40 pounds. The exact weight will depend on various conditions.
A cubic foot of topsoil is most often sold in 40-pound bags. Topsoil cost is not based on weight; however, factors that affect weight make a difference in the quality of the topsoil you purchase.
Dry unit weight is defined as the weight of soil solids per unit volume of soil. It is denoted by letter symbol γd it has the unit of kN/m3. It is used as a measure of the denseness of soil. A high value of dry unit weight indicates that more solids are packed in a unit volume of soil hence a more compact soil.
Bulk density is the weight of soil in a given volume. Soils with a bulk density higher than 1.6 g/cm3 tend to restrict root growth. Bulk density increases with compaction and tends to increase with depth. Sandy soils are more prone to high bulk density.
A 40 pound bag of topsoil usually contains about 0.75 Cubic Feet of soil.
In a bag, measure the bag, and calculate the number of cubic ft (hint, it's usually no more than 1/2 cubic foot). Since 27 cubic ft is a cubic yard, it would take 54 bags to make a yard. However, if it's after the bag has been emptied, the soil will bulk out, which may reduce the number of bags by 20% or more.
For a truck bed that's 14 feet long, 6 feet wide, and 5 feet high, you would calculate 14 x 6 x 5 = 420. This figure is the capacity of your truck bed in cubic feet. There are 27 cubic feet in a cubic yard, so to find your cubic yardage, you need to divide the previous number by 27.
Is gravel heavier than dirt?
A cubic yard measures volume where a ton measures weight. A yard of topsoil usually weighs about 1,800 pounds and a yard of gravel usually weighs about 2,200 pounds.
| Truck | Length | Hauling Capacity |
|---|---|---|
| F150 Short Bed (6 ft.) | 82" | 2 yds, light 3 yds |
| F150 Long Bed (8 ft.) | 98.2" | heaped 3 yds |
| F250 | 98.2" | heaped 3 yds |
| F350 | 98.2" | heaped 3 yds |
A standard dump truck can typically carry 10 to 14 cubic yards of dirt in a truckload. As a result, we can deliver up to 14 SuperSacks can be at one time. If your project is much larger, and you need 32 cubic yards of dirt, you're probably going to need three truckloads of dirt.
The bed of a full size standard pickup has dimensions of: 8' long X 5.33' wide X 1.5' high. When loaded level full, a truck of this size will hold 2.5 cubic yards of material. The following chart outlines some additional common capacities of the full-sized pickup truck.